L-Acoustics S Series Скачать руководство пользователя страница 8

Страница: 8 / 80

Introduction

How to use this manual

The Syva owner's manual is intended for all actors involved in the system design, implementation, preventive and

corrective maintenance of the Syva system. It must be used as follows:

Read the technical description for an overview of all system elements, their features, and their compatibilities.

•

Electro-acoustical description

(p.12)

•

Rigging system description

(p.16)

Prepare the system conguration. Consider the mechanical limits and the available acoustical congurations.

•

Mechanical safety

(p.23)

•

Loudspeaker congurations

(p.25)

Before rigging the system, perform mandatory inspections and functional checks.

•

Inspection and preventive maintenance

(p.31)

To deploy the system, follow the step-by-step rigging instructions and refer to the cabling schemes.

•

Rigging procedures

(p.44)

•

Connection to LA amplied controllers

(p.53)

The

Corrective maintenance

(p.57) section contains the operations authorized for the end user.

Performing another operation exposes to hazardous situations.
For advanced maintenance, contact your L-Acoustics representative.

As part of a continuous evolution of techniques and standards, L-Acoustics reserves the right to

change the specications of its products and the content of its document without prior notice.

Please

check

www.l-acoustics.com

on a regular basis to download the latest document and software updates.

Contact information

For information on advanced corrective maintenance:

• contact your Certied Provider or your L-Acoustics representative
• for Certied Providers, contact the L-Acoustics customer service:

[email protected]

(EMEA/APAC),

[email protected]

(Americas).

Symbols

The following symbols are used in this document:

This symbol indicates a potential risk of harm to an individual or damage to the product.
It can also notify the user about instructions that must be strictly followed to ensure safe installation or operation of

the product.
This symbol noties the user about instructions that must be strictly followed to ensure proper installation or

operation of the product.

This symbol noties the user about complementary information or optional instructions.

Revision history

version number

publication date

modication

1.0

Sep. 2022

Initial version.

Syva owner's manual (EN) version 1.0

Содержание S Series

















































































Результаты поиска

Содержание S Series

Отзывы:

Похожие инструкции для S Series

Бренды по названию

Популярные бренды

L-Acoustics S Series, Руководство пользователя

Результаты поиска

Содержание S Series

Отзывы:

Похожие инструкции для S Series

Бренды по названию

Популярные бренды