L-Acoustics P1 Скачать руководство пользователя страница 36

Страница: 36 / 82

Operation

Output AVB statuses

In the AVB output page, the signal status is visible in the stacked view 2 (refer to

Stacked views

(p.32)).

NOT CONNECTED

The Unit is not connected to any listener.
If unexpected, possible causes are:

• The attempted connection failed.
• An AVB controller requested a disconnection.

To resolve, connect an AVB controller and use it to connect a listener to the Unit.

WAITING REUSE

The AVB stream format has been modied by the AVB Controller, and the AVB talker

interrupted streaming for about 30 seconds to ensure that the previous stream reservations are

released in the network.

WAITING

RESERVATION

The AVB Talker of P1 is waiting for the conclusion of the bandwidth reservation from an AVB

Listener.
If displayed for more than a few seconds:

• Check the network for a disconnected cable.
• Check that the listener is in working order (fully booted).

RESERVATION

ERROR

The bandwidth reservation has failed.
It can also be temporarily displayed when a network cable is disconnected then reconnected.
If displayed for more than a few seconds, check the

List of AVB reservation errors

(p.77).

WAITING START

The bandwidth is reserved but the Unit has received a "stop streaming" command by the AVB

controller: Try disconnecting and reconnecting the stream.

READY

and the

sampling frequency

Waiting for media clock to set up.
If displayed for more than a few seconds, possible cause is: Non-Avnu certied devices on the

network are disrupting the media clock synchronization: preferably use Avnu-certied devices.

STREAMING

and the

stream format

Sending audio stream data.

P1 user manual (EN) version 2.1

Содержание P1



















































































Результаты поиска

Содержание P1

Отзывы:

Похожие инструкции для P1

Бренды по названию

Популярные бренды

L-Acoustics P1, Руководство пользователя

Результаты поиска

Содержание P1

Отзывы:

Похожие инструкции для P1

Бренды по названию

Популярные бренды