Welcome
Welcome
Thank you for purchasing the L-ISA Processor. The shipping carton should contain:
• 1 L-ISA Processor
• 1 power cable
• 1 AES/Midi breakout cable
• 4 rubber feet
• 1 front panel lock key
Each product is tested and inspected before leaving the factory and should arrive in perfect condition.
After the careful opening of the shipping carton, check for any noticeable damage. If so, notify the shipping company or
the distributor immediately. Only the consignee may initiate a claim with the carrier for damage incurred during shipping.
Be sure to save the carton and packing materials to be inspected by the carrier.
Carefully read this document in order to become familiar with the product and to identify the external documents
containing essential information on installing and operating the product properly and safely. Product documents are freely
available on the L-Acoustics web site:
As part of a continuous evolution of techniques and standards, L-Acoustics reserves the right to
change the specications of its products and the content of its document without prior notice.
Please
check
on a regular basis to download the latest document and software updates.
Manuals and procedures
Power ON/OFF procedures
Power ON sequence
1.
If the rear PSU power switch is OFF, turn ON the switch.
2.
Use the front power button to power ON the device.
Power OFF sequence
Always perform a “soft” power OFF using the front button (or via the L-ISA Controller) before turning OFF the rear PSU
power switch.
Service and maintenance
In case of issues during operation, contact your L-ISA representative.
Do not open the chassis or attempt any maintenance operation.
L-ISA Processor product information version 6.0
5
