KIVA SYSTEM
KIVA SB15
m
USER MANUAL
VERSION 1.3
a
KIVASB15m_UM_EN_1.3
w w w . l - a c o u s t i c s . c o m
8
2.2
Line source with low-frequency element
In this configuration – where a KIVA line source is used with SB15m subwoofers and optional SB18 subwoofers – the
bandwidth
of the KIVA system is extended in the low-end and the LF contour
is reinforced.
The [KIVA] preset allows for a reference frequency response in medium to long throw applications.
The [SB15_100] preset provides a 100 Hz upper frequency limit for the SB15m.
The [KIVA_SB15] preset combines the [KIVA] and [SB15_100] presets to facilitate the use of this configuration.
The [SB18_60] preset provides a 60 Hz upper frequency limit for the SB18.
This configuration is driven by the LA4, LA4X or LA8 amplified controller. When using the [KIVA_SB15] hybrid preset,
additional SB18 subwoofers must be driven by another amplified controller.
KIVA line coupled SB15m
Frequency range (-10 dB)
Enclosure
[PRESET]
40 Hz – 20 kHz
KIVA
[KIVA]
Recommended ratio
SB15m
[SB15_100]
3 KIVA: 1 SB15m for a reinforced contour
or
6 KIVA: 1 SB15m for a flat contour
or
KIVA +SB15m
[KIVA_SB15]
Limits for close coupling
Maximum for mixed main/sub line: 12 KIVA + 4 SB15m
Maximum distance between adjacent main/sub lines: 1.35 m
Delay settings
When combining a line source with subwoofers, delays may have to be added to the presets.
Refer to the
PRESET GUIDE
to obtain the pre-alignment delay values.
The [KIVA_SB15] hybrid preset does not allow the independent definition of parameters (gain, delay, etc.) for
different output channels.
When different parameters need to be defined for different channels, it is necessary to build a custom preset
with the [KIVA] and [SB15_100] presets. Refer to the
LA NETWORK MANAGER
tutorial
for detailed
instructions
Use [SB
xx
_
xx
_C] with a SB subwoofer array in cardioid configuration
The cardioid configuration consists in reversing 1 element in an array of 4 subwoofers.
Refer to the SB
xx
user manual
for details about the
Cardioid configuration
.