L-Acoustics K2 Скачать руководство пользователя страница 64

Страница: 64 / 192

Rigging procedures

Procedure

References

Prepare all the blocks of 4 K2 necessary to build the array.

A - Preparing a block of 4 K2

(p.69)

Preset the inter-enclosures angles.

B - Preset the inter-enclosure angles

(p.73)

Place and open a K-BUMPFLIGHT under the motor.

If necessary, attach one or two K2-BAR to the K2-BUMP.

G - Attaching K2-BAR to K2-BUMP

(p.89)

If necessary, stack one or two LA-RAK / LA-RAK II on the K2-BUMP.

• Place K2-BUMP to the ground.
• Stack the LA-RAK / LA-RAK II on the K2-BUMP.
• Raise the K2-BUMP.

M - Mounting LA-RAK/LA-RAK II on K2-

BUMP

(p.115)

Prepare the pickup points.

Refer to

Soundvision

for the number and

position of the shackles.

Lift the assembly so you can position a block of four K2 under it.

Attach the block of four K2 to the K2-BUMP.

H - Attaching a block of four K2 under K2-

BUMP

(p.92)

Lift the assembly so you can position a block of four K2 under it.

Verify that no yellow label is visible on both sides of the array.

10.

Attach the block of four K2 enclosures to the bottom of the array.

J - Attaching a block of four K2 under K2

(p.100)

Verify that the rear rigging arms are secured by pins and that no

yellow label is visible on the front.

11.

Repeat the two previous steps until the array is complete.

12.

If necessary, implement a pullback with K2-RIGBAR.

N - Using a K2-RIGBAR to implement a

pullback

(p.120)

13.

Raise the array to its nal trim height.

14.

Adjust site and azimuth angles.

K2 owner's manual (EN) version 1.1

Содержание K2

































































































































































































Результаты поиска

Содержание K2

Отзывы:

L-Acoustics K2, Руководство пользователя, Страница: 64 / 192

Результаты поиска

Содержание K2

Отзывы: