manualshive.com logo in svg

L-Acoustics ARCS, Руководство оператора

Поделиться
Скачать
L-Acoustics ARCS Скачать руководство пользователя страница 22

L-ACOUSTICS ARCS Manual V2.0  

2/13/2003 

21

 

Whether this is required will also depend on how ''hot or cold'' the FOH mix engineer likes to run the 

console. When in doubt, disconnect all loudspeaker cables and run pink noise from the console at 

nominal level through the crossover to the power amplifiers and examine crossover input/output 

levels, crossover limiter indicators and amplifier clip indicators to verify system protection and gain 

structure.  

3.4 ARCS PRESET LIBRARIES 

All 2-way presets are configured in stereo 3-way mode, i.e., channel A and B Low/High 

outputs are on output channels 2 / 3 and 5 / 6, respectively. This means that drive racks do 

not require recabling when changing from 3-way to 2-way presets. In addition, for these 2-

way presets, channels 1 and 4 are unlocked and available for programming of passive fill 

loudspeakers, subwoofers or, alternatively, for monitoring input system equalization when 

using the SMAART or SPECTRAFOO measurement systems. 

Note: for BSS 366, 3 x 2-way presets are provided in memory locations 37-46. This channel 

configuration is recommended for Left/Centre/Right (LCR) applications. 

Please refer to the appropriate Preset Description Sheet (excel .XLS files) to assist in 

selecting the appropriate preset and as a reference for configuring crossover output channels 

for your drive rack or signal distribution system.  

 

Complete Preset Description Sheet excel files are available for download from 

www.l-

acoustics.com

 along with preset library data. As a quick reference, Figures 5-9 give channel 

assignments for XTA DP226, DP224, BSS 366, BSS 334 and BSS336, respectively.  

Содержание ARCS





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды