L.A. West Sprinter Shuttle, Руководство пользователя

Страница: 16 / 30

11
Emergency Escape Routes
Escape Hatch
It is located in the roof area to be used only in the event of an emergency and is
equipped with release handles that open the hatch.
Note:
Instructions are listed on the hatch. For everyone’s safety frequently check for
proper operations.
Optional Emergency Exit Egress window
• Can be identified by the “Emergency Exit” label on the
glass and has two (2) red
release handles.
•
In an emergency release red handles, rotate them away from the window and push out
to swing window up.
• To close reverse the operation make sure the window is tight against the frame.
Note:
Instructions a
re on each window. For everyone’s safety frequently check the
operations.
•
Daily inspect operations and mechanisms to ensure they are all in good working order.
If any problems are found, have repaired immediately to help ensure the safety of your
passengers.
•
Latches and Mechanisms- Inspect for damage, worn or loose parts. Replace as
necessary. Lubricate hard to move latches with white lithium grease.
•
Emergency Decal- Check to see that the decals are in place and the instructions are
legible. If decals are missing or cannot be clearly read call your dealer to order new.
•
Seals- Inspect for damages and worn or loose areas and replace as necessary. Using
a silicone based spray will clean and condition the seals
• Glass and Shrouding
- Inspect for cracks and chips. Clean window with all-purpose
glass cleaner and use a mild soap on the ABS shrouding.
CAUTION : Emergency windows and escape hatch must be checked for proper
operations before each trip. Someone could be serious injured and or/killed if the
window or hatch operations failed and they were unable to escape the bus during an
emergency.
CAUTION : Never allow an emergency egress window or hatch to be open or opened
when the unit is in motion. This could result in someone being seriously injured and/or
killed.