L-3 Communications CEU, Руководство пользователя

Страница: 54 / 312

Installation STE User’s Manual
2-22 Rel. 2.6
Figure 2-27. Fade Timeout Menu
1. To change the time, press CHANGE to advance the display to the ENTER FADE TIMEOUT
menu ( Figure 2-28 ).
Figure 2-28. ENTER FADE TIMEOUT Menu
a. Using the DIAL PAD KEYS , enter the timeout value in a valid range between 0 and 255
(seconds), as represented by “abc”, and press STORE . If you make a mistake during the
entry process, use DELETE to erase the last digit entered
(1) If the entry is valid, less than 256, the display returns to the FADE TIMEOUT menu
( Figure 2-27 ).
(2) If the entered code is greater than 255, an INVALID ENTRY menu will be displayed.
Enter the correct code, less than 256 then press STORE
b. Pressing ABORT return the display to the FADE TIMEOUT menu ( Figure 2-27 ).
2. If a change is not required, or after any new entry, press SCROLL to advance your display to
one of four menus depending on the ACTIVE NETWORK PORT setting.
3. If the STE is set for ISDN, press SCROLL to advance the display to INITIATE DIRECT DIAL
(Paragraph 2-5.9.5 ).
4. Press BACK to return the display to the NETWORK SETTINGS menu ( Figure 2-7 ).
2-5.9.5 Set INITIATE DIRECT DIAL
This feature supports the United States Navy’s Direct Dial program. The Navy program developed a new
Gateway/Interworking Function (GW/IWF) to support the connection of terminals on independent
ISDN/PSTN networks (such as shipboard and shore based networks). You can connect over satellite
networks and dial direct, with no Operators required. Although the GW/IWF supports calls between all
types of terminals, special STU-III based digital signaling is incorporated to provide enhanced
performance over narrowband GW/IWF links (2.4, 2.8 and 9.6 kbps) when the STEs are on ISDN circuits.
For wideband link operation (64 and 128 kbps), modifications were made to support STE signaling in the
presence of added transmission delays.
The INITIATE DIRECT DIAL menu (
Figure 2-29 ) shows whether the feature is ENABLED or DISABLED.
The default setting is “DISABLED”.
Figure 2-29. INITIATE DIRECT DIAL Menu
FADE TIMEOUT: 10
SCROLL BACK
CHANGE
ENTER FADE TIMEOUT:
abc
DELETE ABORT STORE