L-3 Communications CEU, Руководство пользователя

Страница: 160 / 312

Crypto Card Management STE User’s Manual
6-4 Rel. 2.6
Press: Result:
PAUSE
1
2
3
Inserts a wait for PSTN dial tone (a “W” is displayed}
Inserts a 100-millisecond delay (a “,” is displayed}
Inserts a 2-second delay (a “,,” is displayed}
DELETE Acts as a “backspace” by deleting the last character entered.
ABORT Returns display to Enter New Number to Change menu ( Figure 6-6 ).
Press STORE .
When in the Enter New Number to Change menu ( Figure 6-9 ), press BACK two times to return to the
REKEY FUNCTIONS menu ( Figure 6-3 ). Then, press SELECT to advance to the UPDATE REKEY
PHONE NUMBER/PERFORM REKEY menu ( Figure 6-4 ). Press UPDATE to advance to the UPDATE
STORED PHONE NUMBER menu (). Then press SDNS to advance to the SDNS REKEY PHONE
NUMBER/SELECT TYPE menu (Paragraph 6-2.1.1.2 ).
6-2.1.1.2 SDNS Rekey Phone Number Update
The SDNS REKEY PHONE NUMBER/SELECT TYPE menu ( Figure 6-8 ) provides the ability to select the
memory supporting either STE or SCIP rekey operations.
Figure 6-8. SDNS Rekey Phone Number / Select Type Menu
Press: Result:
STE Advances display to Enter New Number to Change menu ( Figure 6-9 )
SCIP Advances display to Enter New Number to Change menu ( Figure 6-9 )
BACK Returns display to Update Stored Phone Number Menu
(Paragraph
6-2.1.1 )
In the examples below (
Figure 6-9 ), “empty” is shown when the STE is at default (zeroized) or if a
number is in memory, it will be shown (i.e., 19993456789).
Figure 6-9. SDNS Enter New Number to Change Menu
NOTE
YYYYY will be either STE or SCIP depending on your initial selection from the
following options:
Press: Result:
BACK Returns display to SDNS REKEY PHONE NUMBER/SELECT TYPE menu ( Figure
6-8 ).
SDNS REKEY PHONE NUMBER
FNBDT BACK STE
SELECT TYPE
EMPTY XXXXX
BACK
ENTER NEW NUMBER TO CHANGE
19993456789 XXXXX
BACK
ENTER NEW NUMBER TO CHANGE