LS4 manual
www.kystar.com.cn
7
VI、Wiring and installation
Wiring diagram
installation steps
1
、
Connect the DVI interface of the graphics card to the DVI-IN input port of the video
processor as shown in the figure.
2
、
Then connect as shown in the figure, connect the DVI interface of the graphics card to the
DVI-IN input port of the video processor, and connect the DVI-OUT output port of the processor
to the sending card;
3
、
Make sure that the wiring is correct and power on to turn on the video processor.
Signal source
LED
屏
电源线
Output port
Lan cable
USB control cable
