Beijing Kystar Technology Co., Ltd.
57
The current main and standby modes of the splicer are: when the master is abnormal,
switch to the standby output; when the master returns to normal, switch back to the
master output. The splicer judges whether the master is normally judged by KiR signal.
There is a KiR default state setting under System Settings-Connection Settings, which
determines the state of KiR when the program starts. Add KiR switch under canvas
menu to decide whether to send KiR signal currently. Users are requested to make
relevant settings according to their own needs.
7.10 Timed task
The software has a scheduled task function, and the software can be set to switch
and output a specific plan at a specific time.
Select "Timing Setting" under the system menu to expand the following setting
window.
Through "New", you can add timing switching commands, such as the pop-up window
in the middle of the figure above, to set which time period and time to play which plan.
Supports creation of multiple timing instructions.
After the setting is completed, select the "Start timing instruction table" option in the
lower left corner.
