KLS12 manual
www.kystar.com.cn
17
13
、
K-HDR
The K-HDR function is Kstar's SDR to HDR image optimization technology, which can improve the contrast of ordinary
SDR videos, enhance the performance of image details, and make ordinary videos have HDR effects.
Set the K-HDR function parameters of DP or HDMI, including function switch, function level, effective area switch,
effective area parameters, presentation mode. By adjusting the effect level, the perfect display effect applicable to the scene can be
achieved. The default level is 8.
Advanced menu
1
、
Chinese/ENG
Set the language of the device: English or Chinese, the default is Chinese.
2
、
Common function
There are screen brightness, processor brightness, local global, local settings, switching effects, switching time, cutout
settings, transparency settings, intelligent hot backup, EDID, still picture, preview settings, K-HDR. Refer to the frequently used
functions in this chapter.
3
、
Factory
Erase all data and restore to default state. After this operation, the data cannot be recovered. The operation must be performed
with caution, and the on-site configuration data should be backed up in advance.
4
、
Support
Query the device firmware version number and device IP address and other information.
5
、
IP set
View and set the IP address of the device, which can be changed according to the needs of the on-site environment. After the
change, restart the device to take effect.
The default IP address is 192.168.250.250, subnet mask 255.255.255.0, gateway 192.168.250.254
6
、
Com settings
Set serial port parameters, such as baud rate, parity bit, data bit, stop bit parameters, and change them as required.
7
、
Mode delete
This function can delete the mode data stored in the device, either individually or in batches.
8
、
keyboard lock
Lock the keys on the front panel to prevent misoperation by personnel.
