HOW TO USE
HOW TO ASSEMBLE
Mount Rear Guard into the Motor by aligning Rear Guard holes into the
round pins on the motor. Push in gently until the Motor pins protrude
through the Rear Guard holes.
Secure Rear Guard in place by turning in Rear Guard Lock Nut into the
Shaft Guard. Rotate Rear Guard Lock Nut clockwise to lock in place.
Push Fan Blade into the Shaft.
Secure Blade by rotating Blade Cap into the Shaft counter-clockwise.
Fasten Front Guard into the Rear Guard. Connect Front and Rear Guard
by putting Guard Lock on the circumference of the attached Front and
Rear Guards. Tighten Guard Lock screw to lock in place.
OPERATING INSTRUCTIONS
Plug in Wall Fan into the power supply.
Pull string for Speed Control from 1 to 3 speed setting. Pull string to 0 to
turn the unit to OFF.
From steady mode, pull Oscillating Cord to oscillate fan head from side to
side while blowing air.
To adjust fan head vertically, pull Oscillating Cord to steady mode, then
loosen Tilt Adjustment Knob by turning counter-clockwise. Adjust fan
head upward or downward to desired angle then tighten Tilt Adjustment
Knob by turning clockwise.
WALL INSTALLATION
Drill hole into the wall then install provided hanging screw.
Hang fan unit into the wall. Make sure that the base plate of the fan is
properly fixed into the screw on the wall.
CLEAN AND CARE
Carefully wash movable parts of the Industrial Ground Fan with water and
mild detergent.
Avoid any kind of liquid to seep into the motor of the unit.
Avoid using harsh or abrasive cleaning materials when cleaning.
Wipe dry Industrial Ground Fan with a soft and dry cloth.
Put back parts and accessories of the Industrial Ground Fan to their
proper position before operating again.
SERVICE
Do not operate your KYOWA Wall Fan if the unit malfunctions or appears
damaged in any manner. Bring the complete product to the place of
purchase or to any authorized KYOWA dealers for inspection, repair or
replacement.
Do not disassemble your KYOWA Wall Fan by yourself. No user
serviceable parts inside. Refer all needed repair to an authorized KYOWA
service facility ONLY.
3
4
