HOW TO USE
HOW TO ASSEMBLE
Loosen the safety screw (10) from the motor assembly and turn the
mounting bracket (1) clockwise to detach.
Install mounting bracket into the ceiling. ( bulge portion facing up )
Install electrical wiring in motor assembly for preparation of electrical
connection between the motor and speed selector. (No wire provided
upon purchase of this item. Recommended to use 0.75mm² sheathed
type of cord)
Fix motor assembly (3) by turning clockwise into the mounting bracket
slot.
Place screw on the extended metal tab (11) on the bracket and motor
assembly to lock in place.
Mount rear guard (4) into the motor by aligning rear guard holes into the
round pins on the motor, then place the rear guard lock nut (9) into the
shaft guard and turn it clockwise to lock in.
Push fan blade (5) into the shaft then tighten the side screw (8) to lock
in.
Place the front guard (7) into the rear guard then lock it by the guard
lock (6).
Remove the speed selector cover by loosening the screw on the front
cover
Mount the speed selector to the wall
Connect wire from motor assembly to speed selector
Place back the speed selector cover
Connect electrical wiring from speed selector to power source ( make
sure that the speed selector is at off position)
Note:
All electrical wiring and installation should be done by qualified
electrician.
Fans intended to be mounted at high level has to be installed so that
the blades are more than 2.3 meters above the floor or windows.
Provide the means for disconnection with contact separation at least
3 mm.
CLEAN AND CARE
Carefully wash movable parts of the Industrial Ground Fan with water and
mild detergent.
Avoid any kind of liquid to seep into the motor of the unit.
Avoid using harsh or abrasive cleaning materials when cleaning.
Wipe dry Industrial Ground Fan with a soft and dry cloth.
Put back parts and accessories of the Industrial Ground Fan to their
proper position before operating again.
SERVICE
Do not operate your KYOWA Orbit Fan if the unit malfunctions or appears
damaged in any manner. Bring the complete product to the place of
purchase or to any authorized KYOWA dealers for inspection, repair or
replacement.
Do not disassemble your KYOWA Orbit Fan by yourself. No user
serviceable parts inside. Refer all needed repair to an authorized KYOWA
service facility ONLY.
3
4
