IMPORTANT SAFEGUARDS
When using your blender, basic safety precautions should always be followed:
Always operate your KYOWA Blender from a power source of the same voltage
and frequency rating as indicated on the rating label.
Do not place the unit on uneven surfaces. Place blender upon a flat area surface
and far from the edge of counter top.
Do not use blender in damp or wet area. Keep dry the exterior and the base of
the blender.
Do not operate the blender if any part of it has been damaged. Return the
appliance to the nearest authorized dealer or service facility for repair.
Do not operate or place any part of your KYOWA Blender on or near any hot
surface such as a gas or electric burner, hotplate or heated oven.
Do not use or replace accessories other than the ones originally provided.
Always ensure that the blender pitcher is firmly attached to the motor base before
operating.
Always ensure that the pitcher cover is tightly closed while the blender is in
operation.
Always choose the lowest setting first when using the blender. Set higher speed
level if you notice that blender is taking much time processing food.
Use stirrer only to push or mix foods to be processed inside the blender.
Do not overload blender by putting too much food on the container exceeding the
MAX line indicated on the blender container.
Blender will automatically shut off when overloaded; when this happens, press
reset button located at the bottom of the motor base for the unit to start
operating again.
Never leave the blender unattended when in use.
Wait until the blender has completely stopped processing before removing
container from the base.
Switch OFF and unplug the blender outlet before emptying, when not in use or
before cleaning.
Hold plug when unplugging from socket. Do not unplug by pulling the supply cord.
To reduce the risk of electric shock, do not immerse or expose the blender to rain,
moisture or any liquid.
Keep out of reach from children or from persons with mental or physical
disabilities.
CONGRATULATIONS
You are now a proud new owner of a KYOWA Blender model no.
KW-4765.
Before using for the first time, kindly take time to carefully read your
instruction manual. Please observe all safety precautions and follow
operating procedures. After reading, kindly store your instruction manual in
a safe place for your future reference. Should you pass on this blender to a
third party, please hand over this instruction manual as well.
PARTS DESCRIPTION
1
2