IMPORTANT SAFEGUARDS
When using the Blender, basic safety precautions should always be followed:
Always operate your KYOWA Blender from a power source of the same
voltage and frequency rating as indicated on the rating label.
Do not place the unit on uneven surfaces. Place upon a flat area surface and
far from the edge of counter top.
Do not use Blender in damp or wet area. Keep dry the exterior and the base
of the Blender.
Do not operate the Blender if any part of it has been damaged. Return the
appliance to the nearest authorized dealer or service facility for repair.
Do not operate or place any part of your KYOWA Blender on or near any hot
surface such as a gas or electric burner, hotplate or heated oven.
Do not use or replace accessories other than the ones originally provided.
Always ensure that the Blender container is firmly attached to the base before
operating.
Always put in Blender container cover before turning ON the unit.
Foods to be processed in the Blender should not be larger than 1 inch.
Always ensure that the cover is tightly closed while the Blender is in
operation.
While operating, hold to support Blender container cover to avoid any
untoward incidents.
Always choose the lowest setting first when using the Blender. Higher speed
level if you notice that Blender is taking much time processing food.
Use a rubber spatula to push or mix foods to be processed inside the Blender.
Make sure that the unit is turned OFF when mixing foods inside the container.
Do not overload Blender by putting too much food on the container exceeding
the MAX line indicated on the Blender container.
Never leave the Blender unattended when in use.
Wait until the Blender has completely stopped processing before removing
pitcher / dry mill from the base.
Switch OFF and unplug the Blender outlet before emptying, when not in use
or before cleaning.
Hold plug when unplugging from socket. Do not unplug by pulling the supply
cord.
To reduce the risk of electric shock, do not immerse or expose the Blender to
rain, moisture or any liquid.
CONGRATULATIONS
You are now a proud new owner of a KYOWA Blender model no. KW-4714.
Before using for the first time, kindly take time to carefully read your
instruction manual. Please observe all safety precautions and follow
operating procedures. After reading, kindly store your instruction manual in
a safe place for your future reference. Should you pass on this Blender to a
third party, please hand over this instruction manual as well.
PARTS DESCRIPTION
1
2
