To reduce the risk of electric shock, do not immerse or expose the Juicer
Blender to rain, moisture or any liquid.
Keep out of reach from children or from persons with mental or physical
disabilities.
This KYOWA Juicer Blender is intended for normal domestic/household use
only. This unit is not suitable for commercial use.
HOW TO USE
JUICER ASSEMBLAGE & USAGE INSTRUCTIONS
1. Place middle ring on the motor base. (FIG. 1)
2. Place filter over the driver wheel until it locks in place. (FIG. 2)
3. Place transparent cover over the middle ring aligning the pole on the middle
ring into the hole on the cover. (FIG. 3)
4. Lock juicer by pulling locking handle counter-clockwise from 3 o’clock position
to 12 o’clock position. Make sure locking handle is locked in place; otherwise, the
unit will not operate. (FIG. 4)
5. Place pulp container under the pulp spout. (FIG. 5)
6. Place juice pitcher under the juice spout. (FIG. 6)
7. Wash fruits or vegetables to be processed in the Juicer Blender; chop into
pieces fitting into feeder tube.
8. Plug in Juicer Blender into the power supply.
9. Insert fruits and vegetables into the feeding tube, gently push using the
plunger.
10. Turn speed control knob clockwise to I or II depending on the hardness of the
fruit or vegetable you are processing. Rotate speed control knob counter-
clockwise for pulse or controlled-cycle operation.
11. Vitamins disappear quickly from fruits and vegetables when processed so it is
recommended to consume the juice as soon as possible.
12. When extracting juice from apples, add a few drops of lemon into the
processed juice to keep it from turning brown too quickly.
13. Vegetable and fruit pulps after juice extraction can still be used as a base for
soups, sauces, jams and desserts.
14. Rotate speed control knob to 0 or release pulse switch to turn the unit to OFF.
BLENDER ASSEMBLAGE & USAGE INSTRUCTIONS
1. Wash food to be processed into the blender.
2. Cut food into pieces not larger than 1 inch.
3. Put prepared food into the blender pitcher then cover with the blender pitcher
lid. Make sure the food to be processed inside the blender must not exceed the
MAX marking on the pitcher (FIG. 1)
4. Put blender pitcher into the motor base then rotate clockwise until the pitcher
locks in place. (FIG. 2)
5. Turn speed control knob clockwise to I or II depending on the hardness of the
fruit or vegetable you are processing. Rotate speed control knob counter-
clockwise for pulse or controlled-cycle operation. (FIG. 3)
6. Rotate speed control knob to 0 or release pulse switch to turn the unit to OFF.
(FIG. 4)
3
4
