Kyosho Manoi Athlete Humanoid Series, Руководство пользователя

Страница: 9 / 42

178
アイコン解説
注意 ポイント 締め込み注意 方向注意
<{@
組み立て順番
^
挟み込み注意
工程
OP
01
Control by Radio Controlled System
OP1-1
Preparation for Attaching(Disassemble MANOI)
Remove Front Cowl
A t t a c h i n g O p t i o n P a r t s
1
By using KONDO KAGAKU's [KRC‑1 Radio Control Set], Registered Motions in Control Board can be
played by Radio Control(Wirless Control). In this Operation, instruct the way to aseembling
Radio Control Unit.
In this Operation, KONDO KAGAKU's [KRC‑1 Radio Control Set](not included in this product), RC
Pipe Anntena(not included in this product), Servo Lead 240mm[No.HRL111BK](not included in this
product), Anntena Holder which is provided from Kyosho(only in Japan market) are required.
Also, Knife Edge Reamer(HRP007/not included in this product) will be needed in this Operation.
It is recommended to prepare these items beofre starting this Operation.