background image

— 1 —

 

 

1. Safety precautions 

This instruction manual contains warnings and safety rules which must be 
observed by the user to ensure safe operation of the instrument and retain it   
in safe condition. 
Therefore, read through these operating instructions before using the   
instrument. 

 

1-1.      DANGER 

The connector for thermocouple is not insulated. Do not make measurement 
using a thermocouple when there is a risk of electrical shock hazard. 
 

1-2.     WARNING 

KEW5515 is one of the portable laser applied instruments which are regulated   
by the consumer product safety law. 

  Do not look directly into the laser. 

  Do not point the laser directly at persons or animals. 

  When measuring a reflective object such as mirrors, take extra caution so 

as not to look diffuse reflections. 

  Keep out of reach of child or person who doesn

t have the Product 

handling knowledge.   

  Use the Product only as specified. Do not disassemble or modify the 

Product. 

 

1-3.      CAUTION 

Please follow the precautions below for use to keep the instrument’s functions   
proper and to enable accurate measurement.   

  Do not contact this product with a measuring object.   

This is a contactless thermometer. Contact with a hot section may cause 
un-repairable damages or inaccurate readings.   

  Do not damage the measuring window (plastic lens). 

Do not let a foreign object penetrate the measuring window, or drop a hard 
object on the measuring window.   

  This instrument applies precise optical system. Do not give an excessive 

shock to the instrument.   

  Do not bring the instrument closer to an electrostatic object.   

  Emissivity of this instrument can be selected. When the emissivity setting is 

different from that of a measuring object, an inaccurate reading will occur.   

  The sudden changes of the ambient temperature will cause inaccurate 

1. Safety precautions

Содержание KEW 5515















Отзывы: