Kyoeisha Baroness LM1808, Руководство по эксплуатации для владельца

Страница: 9 / 44

2) Adjustment
If the side brake does not work properly, make adjustment with the adjusting
bolts at both ends of the wire. (Fig. 9)
To adjust the engagement between the blade reel cylinder and
bottom blade, bring the edges entirely into slight contact with each
other by using the adjusting nuts so that newspaper can be cut.
① If gap is created between edges
→Slightly loosen the nut B and tighten A.
② If tight and difficult to turn
→Slightly loosen the nut A and tighten B.
◆If the newspaper cannot be cut at some places even if the blades are in
slight contact, grind them by lapping in good time.
4-8 Operation and Adjustment of Side Brake
1) Operation
The side brake is located on the left side of the saddle. Pull it
completely for parking.
While pressing the pushbutton, return the brake lever correctly.
◆ For parking on a hill, apply scotch in addition to pulling the side brake.
Side brake
Adjusting bolt
4-9 Adjustment of Mowing Height
The mowing height is adjusted by moving up/down the roller.
① To increase mowing height
→Loosen the nut A and lower the roller.
② To decrease mowing height
→Loosen the nut B and raise the roller.
◆The front wheel is provided to prevent the blade reel cylinder
from damaging a convex portion of the lawn surface. It should not be
grounded but should be raised 10-20mm.
Rotary blade
Roller
Scale plate
Adjusting nut
Front wheel
High mowing
Low mowing
4-10 Adjustment of Blade Engagement
Adjusting nut
Fulcrum
blade reel
bottom blade
(Fig. 9)
(Fig. 10)
(Fig. 11)
- 7 -