Kyocera Taskalfa Pro 15000c, Руководство по эксплуатации

Страница: 113 / 576

3-54
Installing and Setting up the Machine > Command Center RX
5
Click [Submit].
POP3 POP3 Protocol You don't need to set the following items when you only
enable the function of sending e-mail from the machine.
Set the following items if you want to enable the
function of receiving e-mail on the machine.
Command Center RX User Guide
Check Interval
Run once now
Domain Restriction
POP3 User Settings
E-mail
Send
Settings E-mail Size Limit Enter the maximum size of E-mail that can be sent in
kilobytes. When E-mail size is greater than this value,
an error message appears and E-mail sending is
cancelled. Use this setting if you have set E-mail Size
Limit for SMTP server. If not, enter a value of 0 (zero) to
enable E-mail sending regardless of the size limit.
Sender Address
*1
Specify the sender address for when the machine
sends E-mails, such as the machine administrator, so
that a reply or non-delivery report will go to a person
rather than to the machine. The sender address must
be entered correctly for SMTP authentication. The
maximum length of the sender address is 128
characters.
Signature Enter the signature. The signature is free form text that
will appear at the end of the E-mail body. It is often used
for further identification of the machine. The maximum
length of the signature is 512 characters.
Function Defaults Change the function default settings in [ Common/Job
Default Settings ] page.
*1 Be sure to enter the items.
Setting Description