Kyocera TASKalfa 2551ci, Быстрое руководство по установке

Страница: 12 / 66

12
Installation and initial operation
Hardware installation
The software is supplied on a Compact Flash/Secure Digital
card (‘CF/SD card’). To
use this card, it has to be sited permanently in the printer. All you have to do to install
the card is to insert it into the slot in the printer.
Note
Please note carefully the general tips on working with CF/SD cards in your
printer manual. This manual will also contain a description of where the
CF/SD slot is on your particular device.
Data and programs for Kyocera printers always have to be present in a particular
form on Compact Flash/Secure Digital cards. In the case of the barcode solution,
these are a number of what are known as ‘partitions’ in which additional fonts and
macros for the status page and function calls are stored for the user in addition to the
software.
The following partitions are available once the CF/SD card has been inserted (actual
file names may vary depending on release level):
KMBC3-02-17.so
KMBC3-02-17.so.INF
autostart
BSTP
STP1
STP2
STP3
KM_Logo.ttf
Let_Got_10
Let_Got_12
Let_Got_17
Linedraw
OCR-B_scal
OCRA731
OCRA732
OCRA733
OCRA734
OCRB735
OCRB736
OCRB737
OCRB738
OCR_A
OCR_B
Code39_4
Code39_8
EAN_10mil
EAN_13mil
USPS_ZIP