Kyocera Printing System (W), Руководство по эксплуатации

Страница: 11 / 20

Set-up
5
4 Turn the main power switch of this machine ON ( | ).
For details on setting of each interface, refer to the
Functions Edition.
Connecting the network cable
When using this machine as a network printer, use a network cable (10Base-T or 100Base-TX) to
connect this machine to a network.
1
Turn the main power switch located on the rear left of
this machine OFF (
).
2 Connect the network cable to the network interface
connector located on the rear right of this machine.
3 Connect the other side of the network cable to the hub (concentrator).
4 Turn the main power switch of this machine ON ( | ).
5 Perform the network setting.
For details, refer to Setting the network (TCP/IP) on page 2-6 .