6
82-G1651-1EN, Rev. 002
Begin the pairing procedure with the speaker
powered off.
1.
Press
for 5 seconds the until the speaker
beeps twice and the red and blue lights blink
alternately. This indicates that your speaker is in
pairing status.
Note:
You will find that the blue light will blink first
before the red and blue lights blink
alternately, which indicates the power is
on. Make sure to continue pressing
until the lights are blinking alternately and
the speaker beeps three times.
2.
Execute the search function on your mobile
phone to search for the Bluetooth wireless
technology device. The search may take
several seconds
3.
After the search process has been completed
successfully, the mobile phone screen will
display the name(s) of the device(s) found.
4.
Select
GCK800
and acknowledge that you
would like to pair the device.
5.
You will be requested to enter a password,
passkey, or identification code. Enter “0000”,
and then confirm. Now, your mobile phone
starts pairing with the speaker.
6.
When pairing has been successfully completed,
only the blue light blinks, instead of the red and
blue that were previously blinking
Notes:
•
Confirm that your Wireless Portable Speaker
with Headset is in paring status before pairing,
otherwise your mobile phone will not find it.
•
If pairing is unsuccessful after about one
minute, the speaker will automatically revert
to standby mode.
•
Pairing guarantees secure communication. The
Identification Code exchange will assure that
there is an exclusive connection between your
mobile phone and the speaker.
•
Once your mobile phone and speaker have been
paired, you will not need to pair it again unless
you remove it from your mobile phone.
Connecting
Once you have successfully paired your mobile
phone with the GCK800, you will need to connect
the two devices in order to use them together.
The mobile phone will ask if you would like to
connect the device.
On the mobile phone, confirm that you want to
connect to the device.
You are now ready to use the speaker.
Disconnecting
The speaker will automatically disconnect from your
mobile phone if you are too far from the mobile
phone or if you power off either device.
Reconnecting
If your speaker is disconnected from your mobile
phone, simply press and hold the
, or
until the mobile phone acknowledges it. Your
mobile phone will ask if you would like to connect
to the speaker. Answer
Yes
to connect.
