Kyocera FS-C5015N, Руководство по обслуживанию

Страница: 106 / 192

2HJ/2HK-1
1-5-22
1-5-7 Primary transfer section
(1) Detaching and refitting the primary transfer unit
Procedure
1. Remove the all developer and drum units
(See page 1-5-12 and 1-5-13).
2. Place a paper on the primary transfer belt.
3. Hold the edge of the handle and then raise
the handle(s).
4. Hold the center of two handles by the both
hands.
5. Remove the primary transfer unit from the
printer.
6. Check or replace the primary transfer unit
and then refit all the removed parts.
Figure 1-5-33
(2) Detaching and refitting the primary transfer unit
Procedure
1. Remove primary transfer unit (See above).
2. Remove the two handles.
3. Remove the paper chute.
4. Remove the two screws and then make the
primary transfer unit two-fold.
5. Remove the primary transfer belt.
6. Check or replace the primary transfer belt
and then refit all the removed parts.
Figure 1-5-34
Paper
Handle
Handle
Handle
Handle
Primary transfer
unit (belt)
Primary transfer unit
Primary transfer unit
Primary transfer unit
Primary transfer belt
Handle
Handle
Paper chute
Screw
Screw
Downloaded from www.Manualslib.com manuals search engine