(Page.4/11)
Service Bulletin
Ref. No.
2TV-0015 (J130)
(Service information)
<Date> July 19, 2019
KYOCERA Document Solutions Inc.
For authorized KYOCERA engineers only.
Do not distribute to non-authorized parties.
A
B
C
CONFIDENTIAL
Procedures to attch the dust filter and filter mounting holder
(Estimate work time: 10min. or less)
No
Procedure
Detail
1
Detach the middle left cover (
a
) and lower left
cover (
b
), and clean around the louver (
c
) of
inner and outer side of the machine. (Refer to
each model service manual Chapter4
[Detaching/reattaching the lower left cover] for
the procedures to detach the above cover.)
Reattach the middle left cover (
a
) and lower left
cover (
b
) after cleaning.
2
Clean around the louver (
d
) at the outer side of
the main unit with alcohol.
3
Affix 3 pcs. double sided tape (
f
) to the filter
mounting holder (
e
).
Note:
The double sided tape (
f
) should not run over
the sticking area of the filter mounting holder (
e
)
(Figure for 40ppm printer)
c
a
b
(Example)
c
d
e
f
