Projekt CAMPUS dB
Technical Documentation
Kyocera ECOSYS M6026/M6526cidn
FRA AI/M-D
Author(s): Dirk Czichon
File: CdBTD_Kyocera_EcoSys-M6026M6526cidn.doc
Signed off by:
Manuel Siefker
Version: 1.0
Page 5 of 6
Valid from: 05.07.2014
Vorlage 14.07.2004
Scroll and select “
IP-Address
”,
set according to order
xx.xxx.xxx.xxx
Scroll and select
“
Subnet Mask
”,
set according to order
255.255.xxx.xxx
Scroll and select “
Default Gateway
”,
set according to order
xx.xxx.xxx.x
Leave this level
“
<
”
Scroll and select “
IPv6 Settings
”
see Page 9-20
Scroll and select “
IPv6
”, if not allready set to
OFF
Scroll and select “
RA (Statless)
”, if not allready set to
OFF
Scroll and select “
DHCP
”, if not allready set to
OFF
Leave this level
“
<
”
Scroll and select “
Bonjour
”, if not allready set to
OFF
Scroll and select “
Protocol Detail
”
see Page 9-21
Scroll and select “
NetBEUI
”, if not allready set to
OFF
Scroll and select “
SNMP
”, if not allready set to
ON
Scroll and select “
SNMPv3
”, if not allready set to
OFF
Scroll and select “
RAW Port
”, if not allready set to
ON
Scroll and select “
WSD Scan
”, if not allready set to
OFF
see Page 9-22
Scroll and select “
WSD Print
”, if not allready set to
OFF
Scroll and select “
Enhanced WSD
”, if not allready set to
OFF
Scroll and select “
Enhanced WSD (SSL)
”, if not allready set to
OFF
Leave this level
“
<
”
Leave this level
“
<
”
Leave this level
“
<
”
Scroll and select
Date/Time/Energy Saver
see Page 9-27
Scroll and select “
Low Power Timer
”, if not allready set to
15 Min
Scroll and select “
Sleep Level
”, if not allready set to
Quick Recovery
Scroll and select “
Sleep Rules
” if this point exists; if not skip
Scroll and select “
Network
”, if not allready set to
OFF
Scroll and select “
FAX
”, if not allready set to
OFF
Leave this level
“
<
”
Scroll and select “
Sleep Timer
”, if not allready set to
15 Min
Leave this level
“
<
”
