Kyocera ECOSYS M3145dn, Руководство по эксплуатации

Страница: 301 / 423

8-41
Setup and Registration (System Menu) > System Menu
Send
[ System Menu/Counter ] key > [ ▲ ] [ ▼ ] key > [ Send ] > [ OK ] key
Configures settings for sending functions.
FAX
[ System Menu/Counter ] key > [ ▲ ] [ ▼ ] key > [ FAX ] > [ OK ] key
Configure settings for FAX.
FAX Operation Guide
Item Description
Select Key Set. Commonly used sending functions can be registered to the Select key. Functions can be easily
configured by selecting the Select key.
Value : None, Quiet Mode, Color Selection, Original Size, Original Image,
Scan Resolution, Sending Size, Zoom, Orig. Orientation, Mixed Size Orig.,
Continuous Scan, File Format, File Name Entry, Subject/Body, Long Original,
JobFinish Notice, FAX Resolution
*1
, FAX Direct TX
*1
, FAX Delayed TX
*1
,
FAX RX Polling
*1
, FAX TX Report
*1
, Density, Duplex, FTP Encrypted TX, File Separation,
Sharpness, Backgrnd Density, Prevent Bleed-t, Skip Blank Page
*1 Only on products with the fax function installed.
DestinationCheck Set the confirmation of destinations.
*2
*2 Also applies when sending the fax.
Check beforeSend Select whether to display the confirmation screen of destinations after pressing the [ Start ] key
when performing sending jobs.
Value : Off, On
Check New Dest. When adding new destination, select whether to display the entry check screen to check the
entered destination.
Value : Off, On
New Dest. Entry Select whether to permit direct entry of destination.
*2
Value : Permit, Prohibit
Recall Dest. Select whether to permit usage of [ Recall ] on the Send screen.
*2
Value : Permit, Prohibit
Broadcast Set whether to enable broadcast.
Value : Permit, Prohibit
Default Screen Use this procedure to set the default screen displayed when you select the [ Send ] key.
Value : Destination, Address Book
Send and Forward Set whether to send the original to another destination and store it when sending images.
Forward Set the rule to send the original.
Value : Off, On
NOTE
When selecting [ On ], select rules to forward from [ E-mail ], [ Folder (SMB) ], [ Folder (FTP) ] and
[ FAX ]
*1
.
Destination Set the destination to which the original is forwarded. One destination can be set. You can
check and edit the set address.
Follow the steps below to register the destination.
•
Address Book
• Address Entry
Specifying Destination (page 5-14)