manualshive.com logo in svg

Kyocera C5020N - FS Color LED Printer, Справочник по командам

Поделиться
Скачать
Kyocera C5020N - FS Color LED Printer Скачать руководство пользователя страница 3

iii

Typeface Trademark Acknowledgement

All resident fonts in the print system are licensed from Bitstream Inc. and Agfa corporation. For font license information for 
each model, refer to the User’s Manual.

Helvetica, Palatino and Times are registered trademarks of Linotype-Hell AG. Centutry Schoolbook, Stymie, and Cooper-
Black are trademarks of Kingsley-ATF Type Corporation. ITC Avant Garde Gothic, ITC ZapfChancery, ITC ZapfDingbats, 
ITC Souvenir, ITC Benguiat, and ITC Bookman are registered trademarks of International Typeface Corporation. Revue is 
a trademark of Esselte Pendaflex Corporation in the U.S., Letraset Canada Ltd. in Canada, and Esselte Letraset Ltd. else-
where. 

Monotype Imaging License Agreement

1. "Software" shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as 

well as the UFST Software.

2. You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions 

of letters, numerals, characters and symbols ("Typefaces") solely for your own customary business or personal pur-
poses at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License 
Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more 
than three printers, you need to acquire a multi-user license agreement which can be obtained from Monotype Imaging. 
Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you 
other than a License to use the Software on the terms expressly set forth in this Agreement.

3. To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information 

concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of 
the Software and Typefaces.

4. You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree 

that any such copy shall contain the same proprietary notices as those appearing on the original.

5. This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License 

may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not rem-
edied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall 
either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as 
requested.

6. You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.

7. Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Mono-

type Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Mono-
type Imaging does not warrant that the Software is free from all bugs, errors and omissions.

8. THE PARTIES AGREE THAT ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES 

OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE EXCLUDED.

9. Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is 

repair or replacement of defective parts, upon their return to Monotype Imaging.

10. IN NO EVENT WILL MONOTYPE IMAGING BE LIABLE FOR LOST PROFITS, LOST DATA, OR ANY OTHER INCI-

DENTAL OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY ABUSE OR MISAPPLICATION OF 
THE SOFTWARE AND TYPEFACES.

11. Massachusetts U.S.A. law governs this Agreement.

12. You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written con-

sent of Monotype Imaging.

13. Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data 

and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. 
Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 
52.227-19 (c)(2).

14. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE 

BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR REP-
RESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS AGREEMENT IS EFFECTIVE 
UNLESS WRITTEN AND SIGNED BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY. BY OPEN-
ING THIS DISKETTE PACKAGE, YOU AGREE TO ACCEPT THE TERMS AND CONDITIONS OF THIS AGREE-
MENT.

Содержание C5020N - FS Color LED Printer



























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды