rëÉê=dìáÇÉ=Ñçê=_ä~ÇÉ=mÜçåÉë
39
1.
Connect the phone to the laptop or PC.
(See page 38.)
2.
Set the Com Speed.
3.
Select
Menu
→
Settings
→
Network
→
Data/Fax Calls
.
4.
Press
to select an option:
–
Voice only—
Allow only voice calls.
–
Fax, next call
or
Data, next call—
Set the phone
to fax mode or data mode for the next
incoming call or the next 10 minutes.
–
Fax, until off
or
Data, until off—
Force the
phone into fax mode or data mode until the
phone is turned off.
Note:
You cannot receive voice calls while the phone
is in data/fax mode.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
Note:
Enable TTY only when using
the phone with a TTY device.
1.
Connect the TTY device to the phone.
2.
Enter
from
your keypad.
3.
Press
to select the
TTY
option.
Setting position location
This setting allows you to share your location
information with network services other than
emergency services (911, 111, 000, etc.), in markets
where service has been implemented.
Note:
This feature works only when your phone is in
digital mode. You do not have the option of turning off
the locator to emergency services.
1.
Select
Menu
→
Settings
→
Network
→
Location
.
2.
If you see a message prompt, press
to
continue.
3.
Select
911 Only
or
Location On
.
–
911 Only
(default) shares your position
information only with emergency services
when you call your 3-digit emergency code
(911, 000, 111, etc.).
–
Location On
shares your position information
with your service provider’s network, in
addition to emergency services.
For information on emergency calls, see “Calling
emergency services” on page 7.