Kyocera BF-720, Руководство по эксплуатации

Страница: 15 / 44

English
DF-760(B), MT-720(B), BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 13
2
Load the originals in the Document Processor, or
one at a time on the Platen.
NOTE:
Refer to the Operation Guide for the machine
for Document Processor and Platen specifications.
A maximum of 16 sheets can be bound in a single
operation. Up to 64 original sheets can be loaded at
one time.
3
Select other features as required and press Start .
4
Copies will be automatically stapled and ejected
onto the folding tray.
If the maximum capacity is reached, a message
displays. Remove all copies from the folding tray to
continue.
NOTE:
For further information refer to Center-Folding
Unit (option) on page 38 .
5
On completion of the job, remove the copies from
the folding tray.
Hole Punch Mode
This mode produces hole punched copies
automatically.
Hole Punch mode can be used with Sort: ON , Staple
and Sort: OFF modes .
The following paper sizes can be used:
Inch models
• 2-hole punch: 8
1/2
×
14", 8
1/2
×
11",
5
1/2
×
8
1/2
", A3, B4, A4, A4R, B5, B5R,
A5R and Folio
• 3-hole punch: 11
×
17", 11
×
8
1/2
", A3 and A4
Metric models
• 2-hole punch: A3, B4, A4, A4R, B5, B5R, A5R,
Folio, 8
1/2
×
14", 8
1/2
×
11" and 5
1/2
×
8
1/2
"
• 4-hole punch: A3, A4, 11
×
17" and 11
×
8
1/2
"
Paper weights must be between 45 g/m
2
and 220 g/m
2
.
NOTE:
Punching requires the optional punching unit.
Tray C cannot be specified as the output destination
for punch mode.
1
Select Hole Punch mode on the operation panel of
the machine.