Kyocera BDX-2, Руководство по эксплуатации для владельца

Страница: 7 / 12

6
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer.
A charger
that is suitable for one type of battery pack may create a risk of fire when used
with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that
can make a connection from one terminal to another.
Shorting the battery
terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack or tool that is damaged or modified. Damaged or
modified batteries may exhibit unpredictable behaviour resulting in fire, explosion
or risk of injury
f) Do not expose a battery pack or tool to fire or excessive temperature. Expo-
sure to fire or temperature above 130 °C may cause explosion.
g) Follow all charging instructions and do not charge the battery pack or tool
outside the temperature range specified in the instructions. Charging im-
properly or at temperatures outside the specified range may damage the battery
and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool is
maintained.
b) Never service damaged battery packs. Service of battery packs should only be
performed by the manufacturer or authorized service providers.
CORDLESS SCREW DRIVER SAFETY PRECAUTIONS
1. Hold the power tool by insulated gripping surfaces, when performing
an operation where the fastener may contact hidden wiring. Fasteners
contacting a “ live ” wire may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
2. Be aware that since this tool does not have to be plugged into an electrical
outlet, it is always in operating condition.
3. First, charge the battery.
4. Be sure the battery holder is securely snapped in place.
5. When not in use, lock the trigger.
6. When operating at high places, be aware of things below you.