- 2 -
Using Tablet Stand (Sample)
The main unit can be placed in the tablet stand (sample) and used on a desk.
1
Open the tablet stand (sample)
2
Set the main unit into the grooves in the tablet stand (sample)
Groove
2
1
◎
The main unit cannot be used with any cover attached. When using the main
unit, take off any cover.
◎
Placing the main unit upright or with the tablet stand (sample) opened only at a
narrow angle can allow the tablet stand (sample) or main unit to tip over. Use
with caution.
◎
When placing the main unit in the tablet stand (sample), place so that they are
centered to each other.
Attaching the au IC Card (SIM Card)
•
Attach the au IC card after turning off the product.
1
With your fingertip on the groove in the au IC card/microSD
memory card tray, pull it out without bending
au IC card/microSD memory card tray
Groove
2
Hold the au IC card with its IC (metal) chip downward and
insert in au IC card/microSD memory card tray
•
Note location of notch.
•
To avoid breaking the tab on the au IC card/microSD memory card tray, slide
the au IC card in the direction shown to attach.
•
Insert the au IC card in the au IC card/microSD memory card tray completely.
Tab
au IC card/
microSD memory card tray
Notch
IC (metal) chip
