Kyocera AK-9110 Скачать руководство пользователя страница 303

Страница: 303 / 401

3-225

Enhancement device setup procedure > Optional device installation

[CONFIDENTIAL]

(5-2) Others (5-2) Status Indicator Light (SL-9100)

This is a procedure of setting up Status Indicator with pole and bracket.

Adjust sound volume.

Separate SL-9100 by rotating it.

Switch from [H] to [L].

Reassemble.

Insert pole ring [A] to bracket [B].

IMPORTANT

•

All tapes and packing materials on the accessories parts have to be removed.

•

Main power switch has to be turned off and power cable has to be unplugged before install SL-9100.

NOTE

Default setting is high volume, H (80dB).

In case if not to change the volume to low, L (70dB), then start from step2.

The sound can be OFF in System menu on operation panel.

[A]

[B]

Содержание AK-9110


















































































































































































































































































































































































































Результаты поиска

Содержание AK-9110

Отзывы:

Kyocera AK-9110, Руководство по установке, Страница: 303 / 401

Результаты поиска

Содержание AK-9110

Отзывы: