Kyocera AJP-1100, Руководство по эксплуатации для владельца

Страница: 5 / 12

4
Preparation
Before starting up your machine, we advise you to carefully
read through this instruction manual. Follow all instructions
to minimize the risk of injuries when using the machine.
Prior to operation
Before starting up your machine, please check it carefully
for any defects. If you find any, do not start up your machine
and contact your distributor.
Especially check:
The insulation of the electric cable should be faultless
and without any cracks. If the electric cable is damaged, it
should be replaced by our authorized distributor.
Mains power supply connection
The following should be observed when connecting the
machine to the electric installation:
• Check before operation that the local power supply is
the same as the specifications on the rating label.
• This machine is equipped with universal motor with
double insulation. It is not necessary to have earth
connection.
• The electric installation shall be made by a certified
electrician.
• It is strongly recommended that the power supply to the
machine should include a residual current device (RCD).
• Product protection degree:IPX5
General safety regulations and accident
prevention
It is essential that you read the safety regulations and
operating instructions in their entirety and follow the
information contained therein in order to eliminate the
possibility of an accident or potentially dangerous situation
from occurring while working with the machine.
• The power plug must be plugged into a properly installed
socket. The power supply should include a residual
current device for max. 30 mA.
• Always check the device, the mains cable and the plug
before using the machine. Only operate the device when
it is in good working order and has not been damaged in
any way. Damaged parts must be immediately replaced
by a qualified electrician.
• Always pull the power plug out of the socket outlet before
doing any work on the machine, before changing the
nozzle and whenever it is not being used.
• Warning! Inadequate extension cords can be dangerous.
• If an extension cord is used, it shall be suitable for
outdoor use, and the connection has to be kept dry.
• Only use suitable extension cable when working
outdoors. Extension cable must have a minimum cross-
section of 1.5 mm
2 .
• Warning! This device was developed to be used with
cleaning agents supplied or recommended by the
manufacturer. The use of any other cleaning agents or
chemicals can negatively affect the safety of the device.
• Cable connections should be kept dry and off the
ground. Always uncoil the extension cable completely to
avoid heat damage to the cable.
• Warning! Do not use the device when other persons or
animals are in the near vicinity unless they are wearing
appropriate protective clothing.
Name of Parts:
1. Main unit
2. Handle
3. Spray gun holder
4. Cord hook
5. Wheel
6. Wheel cover
7. Variable nozzle lance
8. Mid nozzle lance
9. Spray gun
10. Spray gun hose
11. Foam nozzle
12. Water connector
13. Hose joint
14. Nozzle cleaning pin
15. Screw
16. Water supply hose (option)
17. Hose clamp (option)
18. Main switch
19. Safety lock button
20. Trigger
Carefully read and understand these instructions
before operating this high pressure washer.
Package Contents (Fig.1)
1. Main unit
2. Handle
3. Spray gun holder
4. Cord hook
5. Wheel
6. Wheel cover
7. Variable nozzle lance
8. Mid nozzle lance
9. Spray gun
10. Spray gun hose (5m)
11. Foam nozzle
12. Water connector
13. Hose joint
14. Nozzle cleaning pin
15. Screw
Technical data
Power rating input 1,400 W
Rated pressure 70 bar (7 MPa)
Allowable pressure 100 bar (10 MPa)
Rated flow 5.5 L / min
Max. inlet water pressure 0.7 MPa
Max. temperature: 40°C
Adding water From a faucet
Weight 4.5 Kg
Sound pressure level
Uncertainty
LpA=77dB(A)
KPA=3dB
Sound power level LwA=92dB(A)
Vibration Value
aH=1.8m/s
2
Kah=0.05m/s
2
21. Power cord
22. Filter
23. Hook
24. Hook
25. Water inlet
26. Release button
27. Release button
28. Self-priming kit (option)
29. Self-priming filter (option)
30. Self-priming hose (option)
31. Strainer (option)
32. Filter cap (option)
33. Filter (option)
34. Rubber seal (option)
35. Rubber seal
36. Ring (option)
37. Filter case (option)