Kyocera Mita MP-80, Руководство оператора

Страница: 55 / 116

4 ADVANCED FUNCTIONS
Polling Communication 53
Polling Communication
The polling communication function allows you to receive pending originals in the sender's fax machine by manually
operating the receiving fax machine. In this document, the operation in which this equipment is used as the sender's fax
machine is called “polling transmission” while that in which it is used as the recipient's fax machine is called as “polling
reception”.

Polling transmission
Upon request of a recipient's fax machine, this equipment sends an original document stored into the memory to the
recipient. By setting a password or a recipient's telephone number to an original stored into the memory, you can permit
specific recipients to receive the original using the polling transmission.
To use the polling communication function with the password verification applied, the fax machines of both the sender
and recipient have to be the same series machines (MFP).
1
Place the original(s).
 P.19 “Handling an original”
2
Press the [FAX] button on the control panel.
 P.16 “Basic procedures”
3
Press [OPTION] and set the transmission conditions.
 P.23 “Setting the transmission conditions”
4
Press the [ADVANCED] tab, and then press [POLLING RESERVE].
5
To set the password or fax number (the recipient’s telephone number), press
[PASSWORD] or [FAX NUMBER] button. On the entry screen that appears, key in the
password (4 digits) or fax number (a maximum of 20 digits), and then press [OK].
 You do not have to set both the password and the fax number.
 If you have to set neither a password nor a fax number, leave both blank and press [OK].