Kyocera Mita FS-1050, Руководство по эксплуатации

Страница: 61 / 209

Using the Operator Panel
1-51
DataS001 (first data), DataS002 (second data),
DataS003 (third data)...
In the example above, if the file
TEST.TXT
is the first data to be
written onto the memory card, the destination name will be
DataS001
.
As the printer receives data, the message display changes to
Processing
, then when the end of the data is received, the message
display changes to
Waiting
.
8
Make sure that the message display changes to
Waiting
, then press
the GO key. This has the effect of writing the file into the memory
card and instructs the printer to print a memory card
WRITE
INFORMATION
page as shown below.
Partition Type Partition Type Partition Type Partition Type. Type of data written (currently only type 2 is supported).
Partition Name
Partition Name Partition Name Partition Name. The destination name of data written on the card.
Write Partition Length
Write Partition Length Write Partition Length
Write Partition Length. The size of the data written on the memory card.
Others
Others Others
Others. Error information.
After the memory card
WRITE INFORMATION
page is printed, the
message display returns to
Ready
.
If the writing procedure is not successfully completed, an error code
appears on the message display. For details, see section
4.3.3 Errors
4.3.3 Errors 4.3.3 Errors
4.3.3 Errors
Messages
Messages Messages
Messages
on page
4-9
4-9 4-9
4-9
. If this happens, press the GO key. The
message display returns to
Ready
.
9
Repeat the steps above until you have transferred all the data (files)
you want to write on the memory card. Each time you finish writing
data, a memory card Write Information page is printed, which
contains the information explained in
step 8
step 8 step 8
step 8
above, but pertaining
only to the data just written. To see all data contained in the memory
card at once, print a list of data names as explained on page
1-54
1-54 1-54
1-54
,
Printing a List of Data Names
Printing a List of Data Names Printing a List of Data Names
Printing a List of Data Names
.