KYMCO SUPER8 50, Руководство по обслуживанию, Страница: 45 / 188

3
. INSPECTION/ADJUSTMENT
3-10
SUPER8 50 2T
Wash the air cleaner element in detergent
oil, squeeze out and allow to dry.
=
After washing, soak the element in clean
engine oil SAE 10W-30# and squeeze out
excess oil. Reinstall the element.
《
Cylinder Compression
》
Remove the spark plug and insert a
compression gauge.
Open the throttle valve fully and push the
starter button for 7
～
8 seconds to test the
compression.
Compression:
11.8kg/cm
²
If the compression is low, check for the
following:
•
Leaking cylinder head gasket
•
Worn piston/cylinder
If the compression is high, it indicates that
carbon deposits have accumulated on the
combustion chamber and the piston head.
LUBRICATION SYSTEM
《
Oil Filter Cleaning
》
Disconnect the oil tube at the oil pump side
and allow oil to drain into a clean container.
Remove the tube clip at the oil tank side
and disconnect the oil tube.
Remove the oil filter.
Oil Filter
Clip
Warm up the engine before compression
test.
＊
Never use gasoline or organic vaporable
oil with acid or alkali for washing.
＊
Soak in oil
Squeeze
out and dry
Wash
Squeeze out
excess oil dry