KYMCO Super 8 150, Руководство пользователя, Страница: 42 / 56

40
MAINTENANCE
Transmission fluid change
1. Place the scooter on its main stand.
2. Place a suitable container (drain pan) under the transmis-
sion case on its left side. Remove the drain bolt
4
to
drain the fluid.
3. After the fluid has drained out, reinstall the drain bolt with
a new sealing washer and tighten it to the specified torque.
Transmission fluid type: SAE 90
Transmission fluid capacity: 0.19 qt (0.18 L)
NOTE: The fill amount specified is the amount to use after
completely draining the used transmission fluid.
6. Install the transmission fluid filler bolt with a new sealing
washer and tighten it to the specified torque.
Transmission fluid filler bolt torque: 15 lb-ft (20 N-m)
Transmission fluid drain bolt torque: 15 lb-ft (20 N-m)
4. Remove the transmission fluid filler bolt
3
.
5. Add the exact amount of the specified fluid through the
fluid filler hole
5
.
Using the wrong transmission fluid type or viscosity
may cause premature transmission component wear.
Do not exceed the specified amount when adding trans-
mission fluid. If too much fluid is added to the trans-
mission case it could be forced into the air cleaner as-
sembly during operation, causing air filter contamina-
tion and poor engine performance.
3 3 3 3 3
4 4
4 4
4
5 5 5 5 5