KYMCO People S 250, Руководство по обслуживанию

Страница: 215 / 229

18
. STARTING SYSTEM
18-2
PEOPLE 250
SERVICE INFORMATION
GENERAL INSTRUCTIONS
•
The removal of starter motor can be accomplished with the engine installed.
•
For the starter clutch removal, refer to page 10-3.
•
After the starter clutch is installed, be sure to add the engine oil and coolant and then bleed air
from the cooling system.
SPECIFICATIONS
Item Standard (mm) Service Limit (mm)
Starter motor brush length 12.5mm 8.5mm
TORQUE VALUES
Starter motor mounting bolt 6.7
_
10.8N-m
Starter motor case screw 2.9
_
4.9N-m
Starter clutch bolt 9.8
_
13.7N-m
SPECIAL TOOLS
Flywheel holder
Flywheel puller
TROUBLESHOOTING
Starter motor won‘t turn Lack of power
•
Fuse burned out
•
Weak battery
•
Weak battery
•
Loose wire or connection
•
Faulty ignition switch
•
Foreign matter stuck in starter motor
•
Faulty starter clutch
or gear
•
Faulty front or rear stop switch
•
Faulty starter relay Starter motor rotates but engine does
•
Poorly connected, broken or shorted wire
not start
•
Faulty starter motor
•
Faulty starter pinion
•
Starter motor rotates reversely
•
Weak battery