CONTROLS & FEATURES
Adjust clock
The setting procedure:
1. Turn the ignition switch to the ON position.
2. Push the MODE button t o toggle between
ODO mode,trip mode and oil service.
Choose ODO mode.
▆
NOTE:
The d
igital clock can be only adjusted in ODO
mode.
3. Push both MODE and ADJ for more than 2
seconds.
The “hour” digits will begin flashing ,
you can adjust it by pressing ADJ button.
4. Push the MODE button ,the minute digits will
begin flashing,you can adjust it by pressing
ADJ button.
5. Push both the MODE and ADJ at the same
time to finish the clock setting.
▆
NOTE:
The adjustment will be cancelled if any
button is not pressed within approximately ten
seconds.
▆
NOTE:
The clock will be reset to 12:00 when the
battery is disconnected
1 3
