KYMCO MXU 500i Скачать руководство пользователя страница 139

Страница: 139 / 171

8-26

8.12. VALVE CLEARANCE ADJUSTMENT

The correct valve clearance changes with use, resulting in

improper fuel/air supply or engine noise. To prevent this, the

valve clearance must be adjusted regularly. This adjustment

however, should be left to a professional KYMCO service

technician.

8.13. FRONT BRAKE PADS

The clearance between the brake pads and brake discs is

adjusted automatically as the pads wear. The only

maintenance that is required is to replace brake pads when

they become worn. To check the thickness of the brake pads

use this procedure.

Remove a front wheel.

Measure the thickness of each brake pad. If the

thickness of less than 1.0mm (0.039in), take your ATV to

a KYMCO dealer to have brake pads replaced.

Reinstall the wheel and tighten the lug nuts to 61N-m.

Содержание MXU 500i












































































































































































Результаты поиска

Содержание MXU 500i

Отзывы:

KYMCO MXU 500i, Руководство пользователя, Страница: 139 / 171

Результаты поиска

Содержание MXU 500i

Отзывы: