KYMCO MXER 50R Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 162

KYMCO MXER 50R Скачать руководство пользователя страница 11

WARNING INFORMATION

Your ATV comes with a hang tag and several
labels containing important safety information.
Anyone who rides the vehicle should read and
understand this information before riding.

Parents of young riders should make sure their
youngsters read and understand the hang tag
and label information before allowing them to
ride.

The labels should be considered as permanent
parts of the vehicle. If a label comes off or
becomes hard to read, contact your KYMCO
dealer for replacements

2

Improper ATV use can result in SEVERE
INJURY or DEATH.

NEVER operate :

Without proper training or instruction.
At speeds too fast for your skills

the conditions.
Do not operate the vehicle after
consuming ALCOHOL OR DRUGS.

ALWAYS :

Use proper riding techniques to avoid

vehicle overturns on hills and rough
terrain and in turns.

For your safety, wear gear to include

helmet gloves and foot protection.

READ OWNER'S MANUAL, FOLLOW

ALL INSTRUCTIONS AND WARNINGS.

or

Gasoline is flammable shut off engine,

avoid sparks and open flame when refueling.

WARNING

NEVER USE WITH
ALCOHOL OR DRUGS

ALWAYS USE AN
APPROVED HELMET AND
PROTECTIVE GEAR

«
...
9
10
11
12
13
...
»

Содержание MXER 50R



































































































































































Отзывы:

Нет отзывов