KYMCO KXR 250, Руководство по обслуживанию

Страница: 9 / 242

1
. GENERAL INFORMATION
1-7
Mongoose/KXR 250
„
After clamping, check each wire to make
sure it is secure.
„
Do not squeeze wires against the weld or
its clamp.
„
After clamping, check each harness to
make sure that it is not interfering with
any moving or sliding parts.
„
When fixing the wire harnesses, do not
make it contact the parts which will
generate high heat.
„
Route wire harnesses to avoid sharp
edges or corners. Avoid the projected
ends of bolts and screws.
„
Route wire harnesses passing through the
side of bolts and screws. Avoid the
projected ends of bolts and screws.
No Contact !