12
4.3 Adustments
●
Battery Overload Protector
1. A Powerchair uses two batteries connected in series.
2. If the Powerchair is overloaded, the overload protector
(100 A) pops out. Press the protector button back in, to
turn on the Powerchair again (see Figure 2).
3. Turn off the Powerchair before resetting Overload
switch.
Figure 1
Figure 2
●
Leg rests
1. Fold up the leg rests and remove the leg straps (see
Figure 1).
2. Turn the leg rest shaft to 90° left and right (see
Figure 2)
3. Turn 90° left and lift the leg rest to remove it (see
Figure 3)
Figure 1
Figure 2
Figure 3