14
. BATTERY/CHARGING SYSTEM/
A.C.
GENERATOR
14-4
AGILITY 125
CHARGING SYSTEM
SHORT CIRCUIT TEST
Disconnect the ground wire from the battery
and connect an ammeter across the battery
negative (-) terminal and the ground wire.
Turn the ignition switch OFF and check for
short circuit.
If any abnormality is found, check the ignition
switch and wire harness for short circuit .
CURRENT TEST
This inspection must be performed with an
electric tester when the battery is fully
charged.
Warm up the engine for inspection.
Connect the electric tester across the battery
terminals. Disconnect the fuse and connect an
ammeter between the fuse terminals.
Attach a tachometer to the engine.
Start the engine and gradually increase the
engine speed to measure the limit voltage and
current.
Limit Voltage/Current
: 14
～
15V/0.8A max.
(5000rpm max.)
If the limit voltage is not within the specified
range, check the regulator/rectifier. (
Ö
14-5)
LIGHTING SYSTEM LIMIT VOLTAGE
INSPECTION
Remove the handlebar front cover. (
Ö
2-2)
Limit Voltage
: 12
～
14V/ (5000rpm max.)
If the limit voltage is not within the specified
range, check the regulator/rectifier. (
Ö
14-5)
Connect the electric tester positive (+)
terminal to ground wire and the tester
negative (-) terminal to the battery
negative (-) terminal.
＊
Measure the voltage with the electric
tester in the AC range.
＊
Terminal
Headlight Wire Coupler
Perform this test with a fully charged
battery.
＊
(-) Terminal
Battery
(+) Terminal
fuse
