Mounting
8
Step 1: Use screws to fix the plate for panel mounting to the rear panel of the device.
Step 2: Select the mounting position (on a wall or inner wall of a cabinet) for the device and
guarantee adequate space and heat dissipation for it.
Step 3: Punch four holes in the selected position according to the dimensions for panel
mounting. Insert four screws into the four holes respectively, and turn the screws with a
screwdriver until about a 5mm distance is left between each screw head and the wall.
Step 4: Align the four mounting holes on the plate for panel mounting with the four screws.
Make the screws pass through the Ф6.5 positions in the following figure. Move the device in
direction 1 until the four screws are in the Ф4 positions. Then tighten the screws to complete
mounting.
Figure 7 Panel Mounting
Dismounting
Step 1: Loosen the four screws with a screwdriver. Move the device upward until the four
screws are in the Ф6.5 positions in the following figure. Then remove the plate for panel
mounting from the four screws to detach the device from the wall or inner wall of the cabinet.
Step 2: Loosen the screws completely with a screwdriver. Remove them from the wall or
inner wall of the cabinet. Then remove the plate for panel mounting from the rear panel to
complete dismounting the device.