Kyland Technology (Shanghai) Co., Ltd PTS-30 Time Server
1.
Basic Features
1.1.
Introduction
The PTS-30 time server is a standard time synchronization server. Support GPS, BDS,
GLONASS, IRIG-B and PTP time source, internal built-in TCXO, OXCO, Rubidium
Oscillator and multiple sources time sync automatic selection algorithm and
Master/Slave clock redundant switch control logical, which will perform GPS, BDS,
GLONASS, IRIG-B, PTP and local clock System multiple time source auto selection,
sky/grounding and master/slave clock backup. PTS-30 time server provides flexible
time synchronization signal output slots which can help to configure different timing
output interface channel. The output timing channels include PPS, PPM, PPH, IRIG-B
(DC), IRIG-B (AC), Serial Time Signal (TOD etc.) etc. Both fiber and copper interfaces
are supported. Plus, PTS-30 supports network sync time protocols NTP/SNTP/EEE1588
v2.0. IEEE1588 works in several modes by the software configuration including
grandmaster clock, slave clock and boundary clock. PTS-30 time server also has alarm
contact output. PTS-30 time server provides 5.7 inch color touch screen as HMI and
the visualization interface is available for work status monitoring and parameters
setting. Meanwhile, PTS-30 time server is designed to send timing source status and
clock status to control center by IEC61850, IEC60870-5-104, IEC60870-5-101, DNP3.0,
and Modbus etc. PTS-30 time server also supports WEB and SNMP to manage system.
- 2 -