KYLAND Technology SICOM3000GPT, Руководство по установке оборудования

Страница: 36 / 56

Optical fiber
SFP optical module
SFP slot
Connection
30
ƽ
How to Connect the SFP Optical Module
Figure 29 Connecting the SFP Optical Module
Insert the SFP optical module into the SFP slot in the switch, and
then insert the fibers into the TX port and RX port of the SFP module.
Identify the RX port and TX port of an SFP optical module:
1. Insert the two connectors in one end of two fibers into the SFP
module, and those in the other end into the peer module.
2. View the corresponding connection status LED:
If the LED is on, the connection is correct. If the LED is off, the link is not
connected. This may be caused by incorrect connection of the TX and
RX ports. In this case, swop the two connectors at one end of the fibers.
Caution:
ƽ
The device uses laser to transmit signals in fibers. The laser
meets the requirements of level 1 laser products. Routine
operation is not harmful to your eyes, but do not look
directly at the fiber port when the device is powered on.
ƽ
If the defined transmission distance of an SFP module is longer
than 60km, do not use a short fiber (<20km) for connection.
If such a short fiber is used, the module will be burned.