Mounting
8
(8)
P1&P2: ON/OFF
Switches for Power 1 and Power 2
3 Mounting
3.1 Dimension Drawing
Figure 9 Dimension Drawing (unit: mm)
Caution:
As part of the heat dissipation system, the switch housing becomes hot during operation. Please use
caution when coming in contact and avoid covering the switch housing when the switch is running.
The figures in this manual are only for reference.
3.2 Mounting Modes and Steps
The series switches support rack mounting by front/rear panel. The following uses mounting by
front panel as an example to describe mounting steps. The steps for mounting by rear panel are
